Astronomers have discovered what happens when the eruption from a supermassive black hole is swept up by the collision and merger of two galaxy clusters. This composite image contains X-rays from Chandra (blue), radio emission from the GMRT (red), and optical data from Subaru (red, green, and blue) of the colliding galaxy clusters called Abell 3411 and Abell 3412. These and other telescopes were used to analyze how the combination of these two powerful phenomena can create an extraordinary cosmic particle accelerator.
Image credit: X-ray: NASA/CXC/SAO/R. van Weeren et al; Optical: NAOJ/Subaru; Radio: NCRA/TIFR/GMRT link
Iowa State University scientists have built a device that mimics the branches and leaves of a cottonwood tree and generates electricity when its artificial leaves sway in the wind.
Curtis Mosher (left), Eric Henderson (middle) and Mike Mcloskey (right) have assembled a prototype biomimetic tree that produces electricity. Such technology could appeal to a niche market in the future, according to the researchers. Photo by Christopher Gannon.
Michael McCloskey, an associate professor of genetics, development and cell biology who led the design of the device, said the concept won’t replace wind turbines, but the technology could spawn a niche market for small and visually unobtrusive machines that turn wind into electricity.
“The possible advantages here are aesthetics and its smaller scale, which may allow off-grid energy harvesting,” McCloskey said recently in his ISU laboratory. “We set out to answer the question of whether you can get useful amounts of electrical power out of something that looks like a plant. The answer is ‘possibly,’ but the idea will require further development.”
McCloskey said cell phone towers in some urban locations, such as Las Vegas, have been camouflaged as trees, complete with leaves that serve only to improve the tower’s aesthetic appeal. Tapping energy from those leaves would increase their functionality, he said.
In a paper published this month in the peer-reviewed academic journal PLOS ONE, the ISU research team delves into the world of biomimetics, or the use of artificial means to mimic natural processes. The concept has inspired new ways of approaching fields as varied as computer science, manufacturing and nanotechnology.
It’s unlikely that many people would mistake the prototype in McCloskey’s laboratory for a real tree. The device features a metallic trellis, from which hang a dozen plastic flaps in the shape of cottonwood leaves.
Curtis Mosher, an associate scientist at Iowa State and co-author of the paper, said it’s not that great of a leap from the prototype the researchers built to a much more convincing artificial tree with tens of thousands of leaves, each producing electricity derived from wind power.
“It’s definitely doable, but the trick is accomplishing it without compromising efficiency,” Mosher said. “More work is necessary, but there are paths available.”
Small strips of specialized plastic inside the leaf stalks release an electrical charge when bent by moving air. Such processes are known as piezoelectric effects. Cottonwood leaves were modeled because their flattened leaf stalks compel blades to oscillate in a regular pattern that optimizes energy generation by flexible piezoelectric strips.
Eric Henderson, a professor of genetics, development and cell biology who also works on the research team, envisions a future in which biomimetic trees help to power household appliances.
Such biomimetic technology could become a market for those who want the ability to generate limited amounts of wind energy without the need for tall and obstructive towers or turbines, Henderson said.
But McCloskey said making that vision reality means finding an alternative means of mechanical-to-electrical transduction, or a scheme for converting wind energy into usable electricity. The piezo method adopted for the ISU experiments didn’t achieve the efficiency the technology will need to compete in the market.
Piezoelectricity was an obvious place to start because the materials are widely available, Henderson said. But taking the next step will require a new approach.
Other transduction methods such as triboelectricity, or the generation of charge by friction between dissimilar materials, work at similar efficiency and can power autonomous sensors. However, McCloskey said it will require much greater efficiency – and further research – to produce a practical device.
A news report from Michigan State University
Trillions of neutrinos, or ghost particles, are passing through us every second. While scientists know this fact, they don’t know what role neutrinos play in the universe because they are devilishly hard to measure.
New measurements of neutrino oscillations, observed at the IceCube Neutrino Observatory at the South Pole, have shed light on outstanding questions regarding fundamental properties of neutrinos. These new measurements of neutrinos as they change from one type to another while they travel were presented at the American Physical Society Meeting in Washington. They could help fill key gaps in the Standard Model, the theory that describes the behavior of fundamental particles at every energy scale scientists have been able to measure.
“While the Standard Model is an accurate theory, it leaves gaping holes, like the nature of dark matter and how a universe filled with matter, rather than anti-matter, arose from the Big Bang. We don’t know how to fill them yet,” said Tyce DeYoung, MSU associate professor of physics and astronomy. “We’re hoping that by measuring the properties of neutrinos, such as their masses and how they morph or oscillate from one into another, we may get some clues into these open questions.”
Neutrinos are weird particles. Unlike other elementary particles that make up ordinary matter, such as electrons and quarks, neutrinos have no electric charge. They’re also at least a million times lighter than any other particle known to science. In fact, their masses are so small scientists have not yet been able to measure them accurately.
With this in mind, DeYoung compares his work to a fishing trip, one in which scientists aren’t quite sure of the best bait to use. “Fishing” through the ice of Antarctica, though, is yielding promising results and narrowing the search.
“As physicists, we hoped the Higgs boson would point us to the physics that lies beyond the Standard Model; unfortunately, our measurements of the Higgs haven’t turned up many clues,” DeYoung said. “So we hope we may find something by studying neutrinos. IceCube detects neutrinos with a wider range of energies and distances than other experiments, so we cast a wide net.”
Energetic neutrinos produced by cosmic rays hitting the Earth’s atmosphere can be detected at the South Pole, using the Antarctic ice as a particle detector like no other on the planet.
The IceCube data suggest that one species of neutrino may comprise exactly equal amounts of two neutrino “flavors.”
“Neutrinos have a habit of changing, or oscillating, between three types, we call them ‘flavors,’” said Joshua Hignight, the MSU research associate who presented the new results at the meeting. “So, if one neutrino is a precisely equal mix of two flavors, it could be a surprising coincidence or there might be a deeper reason for it coming from the physics beyond the Standard Model.”
These measurements are consistent from results from other experiments using neutrinos with lower energies, but whether this flavor mixture is exactly balanced remains under debate. The IceCube physicists will continue to refine their analysis and collect more data. Future data will enable these measurements to be made more precisely, DeYoung said.
IceCube is the world’s largest neutrino detector, using a billion tons of the Antarctic ice cap beneath the U.S. Amundsen-Scott South Pole Station to observe neutrinos. It’s operated by a collaboration of 300 physicists from 48 universities and national laboratories in 12 countries. Construction was made possible by support from the National Science Foundation and other international funding agencies.
Contact(s): Layne Cameron Media Communications office: (517) 353-8819 cell: (765) 748-4827 Layne.Cameron@cabs.msu.edu , Tyce DeYoung Physics and Astronomy office: (517) 884-5511 tdeyoung@msu.edu
article credit
Captured image marks an important milestone as AlSat Nano is Algeria’s first CubeSat mission.
Surrey Space Centre (SSC), University of Surrey was responsible for the design, build and verification of the spacecraft including a training program for Algerian students, as well as supporting development of a ground station in Algeria and training their operators.
AlSat Nano stuck to a tight development schedule, with less than 18 months between payload selection and flight readiness, allowing UK industry and academia to stay ahead of the curve in the competitive global CubeSat market.
AlSat Nano is a joint nanosatellite mission between the UK Space Agency and Algerian Space Agency (ASAL) as part of an on-going initiative to enhance collaboration. The UK Space Agency has funded the design, build and verification of the spacecraft at Surrey Space Centre (SSC), University of Surrey, as a hands-on learning exercise for Algerian postgrad students to demonstrate the practical elements of low cost space technology. ASAL has provided the launch, and operations are being undertaken in Algeria by ASAL operators trained at SSC.
The image was taken by the Open University C3D2 instrument’s wide field camera on 3rd December 2016 over the Arkhangelsk Oblast region, on the North West coast of Russia. The image was captured under twilight conditions at dawn, showing the coastline to the top of the image, and a brief winter sunrise over the arctic region with a deep red-brown hue. Through the cloud cover there is evidence of hills and snow on mountains, and mist in the river valleys. The object in the foreground is the Oxford Space Systems Ltd AstroTubeTM Boom payload, also carried on board the spacecraft.
Prof Guglielmo Aglietti, Director of Surrey Space Centre, said: “AlSat Nano has been an exciting project for the Surrey Space Centre to be leading. Educational and research elements, and the technology knowledge transfer with the Algerian Space Agency were key parts of this project. Additionally, the development of this nanosatellite platform has been a great opportunity to work with UK payload providers, who are demonstrating some exciting new technologies.”
AlSat Nano is Algeria’s first CubeSat mission and is globally showcasing the capability of UK technology in partnership with industry and academia. With a spacecraft the size of a shoebox yet featuring all the core subsystems of much larger satellites, the programme demonstrates how CubeSats can be assembled quickly and launched at a fraction of the cost. This will help Algeria strengthen its domestic space technology capability by giving their scientists and engineers first-hand experience of spacecraft operations.
Dr Abdewahab Chikouche, Director of Space Programmes at Algerian Space Agency, said: “The Alsat-1N project is a concrete example of the success of our cooperation with UKSA. This project, very enriching from the scientific and technological point of view, allowed ASAL engineers to progress in the integration and testing of nanosatellites and acquire autonomy in its operation. This project will enable Algerian researchers and academics to strengthen national capabilities in advanced space technology.”
The AlSat Nano mission hosts and has demonstrated three payloads, showcasing innovative technologies from UK suppliers: C3D2 imager from Open University, AstroTubeTM Boom from Oxford Space Systems and Thin Film Solar Cell from Swansea University.
Dr Ben Taylor, the SSC AlSat-Nano Project Lead, said: “The Alsat-Nano mission has been a great opportunity to work with a diverse and committed team across the UK and Algeria. The spacecraft carries some exciting new technologies which are already returning some great results and we are looking forward to further results as the mission continues”.
The mission builds on the success of the flight services division at Surrey Space Centre, who are involved with a range of on-going spacecraft missions including CubeSats and larger scale missions. A major on-going project is RemoveDebris, a €15.2M mission led by Surrey, aiming to be one of the world’s first demonstrations of space junk removal when it launches later this year.
credit
earlier related post
The lesser-known constellation of Canes Venatici (The Hunting Dogs), is home to a variety of deep-sky objects — including this beautiful galaxy, known as NGC 4861. Astronomers are still debating on how to classify it. While its physical properties — such as mass, size and rotational velocity — indicate it to be a spiral galaxy, its appearance looks more like a comet with its dense, luminous “head” and dimmer “tail” trailing off. Features more fitting with a dwarf irregular galaxy.
Although small and messy, galaxies like NGC 4861 provide astronomers with interesting opportunities for study. Small galaxies have lower gravitational potentials, which simply means that it takes less energy to move stuff about inside them than it does in other galaxies. As a result, moving in, around, and through such a tiny galaxy is quite easy to do, making them far more likely to be filled with streams and outflows of speedy charged particles known as galactic winds, which can flood such galaxies with little effort.
These galactic winds can be powered by the ongoing process of star formation, which involves huge amounts of energy. New stars are springing into life within the bright, colorful ‘head’ of NGC 4861 and ejecting streams of high-speed particles as they do so, which flood outwards to join the wider galactic wind. While NGC 4861 would be a perfect candidate to study such winds, recent studies did not find any galactic winds in it.
Image credit: ESA/Hubble & NASA
Text credit: European Space Agency
